Pixel TD-382 flash battery power pack features a two-group symmetrical charging design which provides steadier charging voltage and faster recycling time. The TD-382 flash battery pack has ability to use half power (4xAA) circuit and full power circuit (8xAA). Stand-by power consumption is much less than other similar products. The TD-382 flashgun power pack has a built-in thermal protection switch by which the battery power pack will be protected and disconnected in the case of overheating. The battery pack will resume to work again when the temperature conditions return back to normal.

Pixel TD-382 external battery pack provides additional power to external flashes. It significantly increases the number of photos that can be taken in one "series". What's more, it allows you to charge the flash capacitor faster, which facilitates journalism and sport photography. It is powered by 4 or 8 standard or AA batteries. Note that a flash has to be powered as well and the battery pack provides only additional power. It is recommended that you use the same type of batteries for both the flash and the battery pack. A red diode indicating that capacitors are operating, lights up when the device is in a state of charge.

CAUTION: do not take more than 15 photos during one series. Otherwise, you may overheat or damage your flash. After a long series of flashes produced, you should cool down your lamp. Please make sure you have batteries installed in your flashgun.

Compatible flashgun: Nikon SB-900, SB-910