The brand new YN-1410, another standard LED array produced by Yongnuo, is smaller than the YN-160 series but can still run on Sony-type lithium batteries. Power is dimmable down to 1/16, and there are two filters included---one CTO and one for diffusion that slide in front of the diodes.
Yongnuo YN1410 contains 140pcs small LED lights
Its illumination brightness can be adjusted according to environment
The brightness can be divided into 16 grades. Increase or Decrease brightness by press the "+" or "-" on the back
Can be installed on with 1/4 Tripod screw or directly on Hot shoes of camera or camcorder
Color temperature: 5500K
Size: 135 x 105 x 55mm
product Weight: 285g
Package Weight: 500g
Power: 6 x Hi-MH or 6 x AA battery or DC7.2-9V/2A max DC power
accurate color temperature, can reach to the standard lever-5500K
Mighty Power, balance luminance, constituted by 140 highlighted LEDs
Energy efficiency, low heat consumption
Effective photo spot by all-round condenser plate and lamp cup which avoids optical waste
Led life can last 20000 hours
Highly-efficient anti-breakage engineering plastics for light stand and mini stand to eliminate customer concerns
Pure copper metal design for hot shoe base, an effective solution to wearing problem caused by the repeated demolition and installation
16 lever microcomputer dimming which apply to various light circumstance
Support polytypic common battery and test its electronic quantity
According to the time requirements of shooting, choose to use an external power supply in order to achieve long-time shooting
Automatic identification AA battery and lithium battery function
2pcs color filter attached
Can be fixed to the hot shoe of Camera, the professional light holder or tripod
Power Supply
6*Hi-Mh or 6 *AA battery, Panasonic CGR-D16S/D220 SONY NP series rechargeable batteries.
DC7.2-9V/2A max DC power supply is applicable. When connecting to external outlet, the product will automatically cut off power supply from the battery installed in the product.
Warning
The socket is positive inside and negative outside. The positive and negative poles can not be reversed, otherwise the immediate damage will be caused and no warranty repair service will be given
The product contains neither battery nor external power supply
How to use
Install the battery
Install it on with 1/4 Tripod screw or directly on Hot shoes of camera or camcorder and rotate and tighten the screw.
Long press (1s) the power button in the lower right corner on the back of YN1410 until the light is on.
Press the "test" key to test the electronic quantity of the battery. Five-star red indication lights on means full charge capacity, In order to protect recyclable & Rechargeable battery, please renew a battery with more power when less than two-satr red indication lights on.
Accordding to the time requirements of shooting, choose to use an external power supply in order to achieve long-time shooting
16 grades illumination brightness and can be adjusted according to the shooting environment. Press "+" or "-" to increase or decrease
Select the appropriate color temperature board accordding to the shooting environment
Long press (0.3s) power button until the lights off. Take off it from Camera and remove the battery
Always keep the product from rain or damp in order to prevent fire
If the product is idle for long please take out all batteries
Package Content
1 x YN1410 video light
1 x Mini stand
2 x Color temperature board
1 x Battery converter box
1 x User's Manule in English and Chinese
